Powerite 5A 6V/12V Smart Battery Charger and maintainer with clamps 4203004

Smart battery charger
  • £42.91 (Exc. VAT)
Order within for delivery from Thursday 7th July
+ In Stock Now   |   Usually dispatched within 24 hours
Loading...
CLICK & COLLECT ONLY Select your local dealer on checkout
FIND A STOCKIST Find your nearest dealer (not limited to Click & Collect)
TRADE CUSTOMER? Request an account application form

Extension flyleads that can be left permanently in place on the machine are also available separately

Permanent Flylead use 4203005 HERE

and also

3 metre extension cable for garage or workshop use 4203006 HERE

These optional leads simply replace the standard as supplied crocodile clips which will unplug from the charger

The charger is intended for trickle charging on lead-acid batteries and a variety of sealed, maintenance-free lead acid batteries with a nominal voltage of 6 volts or 12 volts and a capacity of 1.2 to 120 Ah as commonly installed in vehicles. Suitable batteries include:

Lead-acid batteries (WET)

Gel batteries (gel-like electrolyte)

AGM batteries (electrolyte absorbed in glass mat). Maintenance-free lead acid batteries (MF)

Not suitable for Li-ion batteries

Technical specifications
 Operating voltage:6V Mode 12V mode
 Output voltage220-240V AC, 50-60 Hz220-240V AC, 50-60 Hz
 Max. Charging voltage6V DC12V DC
 Charging current7.4 V14.6V/14.8V
Ambient temperatures2.5 A2,5 A / 5,0 A
 Housing IP class: IP65  -5°C to +40°C-5°C to +40°C

It is equipped with a micro-processor.

You must read and understand the manual before attempted use

Functions

 The charger is suitable for batteries with a capacity of 1.2-120 Ah.

It is equipped with a micro-processor. Use the MODE key to select one of the below mentioned charging modes depending on battery type, battery condition and environmental conditions.

Once you have selected the suitable charging mode, the charger will automatically detect the connected battery (voltage, capacity, charge status) and calculate the necessary charging parameters (charging voltage and current).

If you select a charging mode unsuitable for the connected battery, or if the battery is defective or incorrectly connected, the charger will not charge and the fault icon will appear. This is NOT a fault on the charger


Barcode: 5056343097158
Contact us with any questions you have about this product

Consumer

Click & Collect Only

Select a collection point from our network of available dealers. You will be notified by the chosen dealer once your order is ready to collect, estimated time is 2-3 days (depending on national holidays and dealer opening hours).

  • Free for orders over £100
  • £11.95 fee for orders below £100

 

Trade

Standard Delivery

Orders will be despatched as follows: To business addresses only; £9.95 (Exc VAT) delivery charge (subject to change depending on account level); Free delivery with net order values of £100 and over (Exc VAT) to the UK Mainland; Orders to N. Ireland/Eire/Isle of Man/Scilly Isles by arrangement; other destinations phone for details; Typical delivery times of 1-2 working days.

Where possible, the Company will endeavour to meet special delivery requirements subject to any additional cost being borne by the Purchaser

Unfortunately, we do not delivery to addresses outside of mainland UK without prior agreement. Without prior agreement you may place an order for Products from outside the UK, but this order must be for delivery to an address in mainland UK unless arranged otherwise prior to your order.

Pallet Charges

Larger items may incur additional carriage charges, including but not limited to 4x4 and SUV tyres.

 

Read our full delivery policy here

Be the first to review 5A 6V/12V Smart Battery Charger and maintainer with clamps. Write a review
Top